Line data Source code
1 :
2 : module chem_surfvals
3 :
4 : !-----------------------------------------------------------------------------------
5 : ! Purpose: Provides greenhouse gas (ghg) values at the Earth's surface.
6 : ! These values may be time dependent.
7 : !
8 : ! Author: Brian Eaton (assembled module from existing scattered code pieces)
9 : !-----------------------------------------------------------------------------------
10 :
11 : use shr_kind_mod, only: r8=>shr_kind_r8
12 : use spmd_utils, only: masterproc
13 : use time_manager, only: get_curr_date, get_start_date, is_end_curr_day, &
14 : timemgr_datediff, get_curr_calday
15 : use cam_abortutils, only: endrun
16 : use netcdf
17 : use error_messages, only: handle_ncerr
18 : use cam_logfile, only: iulog
19 : use m_types, only: time_ramp
20 : use constituents, only: pcnst
21 :
22 : !-----------------------------------------------------------------------
23 : !- module boilerplate --------------------------------------------------
24 : !-----------------------------------------------------------------------
25 : implicit none
26 : private ! Make default access private
27 : save
28 :
29 : public ::&
30 : chem_surfvals_readnl, &! read namelist input
31 : chem_surfvals_init, &! initialize options that depend on namelist input
32 : chem_surfvals_set, &! set ghg surface values when scenario_ghg is 'RAMPED' or 'CHEM_LBC_FILE'
33 : chem_surfvals_get, &! return surface values for: CO2VMR, CO2MMR, CH4VMR
34 : ! N2OVMR, F11VMR, and F12VMR
35 : chem_surfvals_co2_rad ! return co2 for radiation
36 :
37 : public :: flbc_list
38 :
39 : ! Private module data
40 :
41 : ! Default values for namelist variables -- now set by build-namelist
42 : real(r8) :: o2mmr = .23143_r8 ! o2 mass mixing ratio
43 : real(r8) :: co2vmr_rad = -1.0_r8 ! co2 vmr override for radiation
44 : real(r8) :: co2vmr = -1.0_r8 ! co2 volume mixing ratio
45 : real(r8) :: n2ovmr = -1.0_r8 ! n2o volume mixing ratio
46 : real(r8) :: ch4vmr = -1.0_r8 ! ch4 volume mixing ratio
47 : real(r8) :: f11vmr = -1.0_r8 ! cfc11 volume mixing ratio
48 : real(r8) :: f12vmr = -1.0_r8 ! cfc12 volume mixing ratio
49 : character(len=16) :: scenario_ghg = 'FIXED' ! 'FIXED','RAMPED', 'RAMP_CO2_ONLY', 'CHEM_LBC_FILE'
50 : integer :: rampYear_ghg = 0 ! ramped gases fixed at this year (if > 0)
51 : character(len=256) :: bndtvghg = 'NONE' ! filename for ramped data
52 : integer :: ramp_co2_start_ymd = 0 ! start date for co2 ramping (yyyymmdd)
53 : real(r8) :: ramp_co2_annual_rate = 1.0_r8 ! % amount of co2 ramping per yr; default is 1%
54 : real(r8) :: ramp_co2_cap = -9999.0_r8 ! co2 ramp cap if rate>0, floor otherwise
55 : ! as multiple or fraction of inital value
56 : ! ex. 4.0 => cap at 4x initial co2 setting
57 : integer :: ghg_yearStart_model = 0 ! model start year
58 : integer :: ghg_yearStart_data = 0 ! data start year
59 :
60 : logical :: ghg_use_calendar ! true => data year = model year
61 : logical :: doRamp_ghg ! true => turn on ramping for ghg
62 : logical :: ramp_just_co2 ! true => ramping to be done just for co2 and not other ghg's
63 : integer :: fixYear_ghg ! year at which Ramped gases are fixed
64 : integer :: co2_start ! date at which co2 begins ramping
65 : real(r8) :: co2_daily_factor ! daily multiplier to achieve annual rate of co2 ramp
66 : real(r8) :: co2_limit ! value of co2vmr where ramping ends
67 : real(r8) :: co2_base ! initial co2 volume mixing ratio, before any ramping
68 : integer :: ntim = -1 ! number of yearly data values
69 : integer, allocatable :: yrdata(:) ! yearly data values
70 : real(r8), allocatable :: co2(:) ! co2 mixing ratios in ppmv
71 : real(r8), allocatable :: ch4(:) ! ppbv
72 : real(r8), allocatable :: n2o(:) ! ppbv
73 : real(r8), allocatable :: f11(:) ! pptv
74 : real(r8), allocatable :: f12(:) ! pptv
75 : real(r8), allocatable :: adj(:) ! unitless adjustment factor for f11 & f12
76 :
77 : ! fixed lower boundary
78 :
79 : character(len=256) :: flbc_file = 'NONE'
80 : character(len=16) :: flbc_list(pcnst) = ''
81 : type(time_ramp) :: flbc_timing != time_ramp( "CYCLICAL", 19970101, 0 )
82 :
83 : !=========================================================================================
84 : contains
85 : !=========================================================================================
86 :
87 1536 : subroutine chem_surfvals_readnl(nlfile)
88 :
89 : ! Read chem_surfvals_nl namelist group.
90 :
91 : use namelist_utils, only: find_group_name
92 : use units, only: getunit, freeunit
93 : use spmd_utils, only: mpicom, mstrid=>masterprocid, mpi_logical, mpi_integer, &
94 : mpi_real8, mpi_character
95 :
96 : character(len=*), intent(in) :: nlfile ! filepath for file containing namelist input
97 :
98 : ! Local variables
99 : integer :: unitn, ierr, i
100 : character(len=*), parameter :: sub = 'chem_surfvals_readnl'
101 :
102 : character(len=8) :: flbc_type = 'CYCLICAL' ! 'CYCLICAL' | 'SERIAL' | 'FIXED'
103 : integer :: flbc_cycle_yr = 0
104 : integer :: flbc_fixed_ymd = 0
105 : integer :: flbc_fixed_tod = 0
106 :
107 : namelist /chem_surfvals_nl/ co2vmr, n2ovmr, ch4vmr, f11vmr, f12vmr, &
108 : co2vmr_rad, scenario_ghg, rampyear_ghg, bndtvghg, &
109 : ramp_co2_start_ymd, ramp_co2_annual_rate, ramp_co2_cap, &
110 : ghg_yearStart_model, ghg_yearStart_data
111 :
112 : namelist /chem_surfvals_nl/ flbc_type, flbc_cycle_yr, flbc_fixed_ymd, flbc_fixed_tod, flbc_list, flbc_file
113 :
114 : !-----------------------------------------------------------------------------
115 :
116 1536 : if (masterproc) then
117 2 : unitn = getunit()
118 2 : open( unitn, file=trim(nlfile), status='old' )
119 2 : call find_group_name(unitn, 'chem_surfvals_nl', status=ierr)
120 2 : if (ierr == 0) then
121 2 : read(unitn, chem_surfvals_nl, iostat=ierr)
122 2 : if (ierr /= 0) then
123 0 : call endrun(sub // ':: ERROR reading namelist')
124 : end if
125 : end if
126 2 : close(unitn)
127 2 : call freeunit(unitn)
128 : end if
129 :
130 1536 : call mpi_bcast(co2vmr, 1, mpi_real8, mstrid, mpicom, ierr)
131 1536 : if (ierr /= 0) call endrun(sub//" mpi_bcast: co2vmr")
132 1536 : call mpi_bcast(n2ovmr, 1, mpi_real8, mstrid, mpicom, ierr)
133 1536 : if (ierr /= 0) call endrun(sub//" mpi_bcast: n2ovmr")
134 1536 : call mpi_bcast(ch4vmr, 1, mpi_real8, mstrid, mpicom, ierr)
135 1536 : if (ierr /= 0) call endrun(sub//" mpi_bcast: ch4vmr")
136 1536 : call mpi_bcast(f11vmr, 1, mpi_real8, mstrid, mpicom, ierr)
137 1536 : if (ierr /= 0) call endrun(sub//" mpi_bcast: f11vmr")
138 1536 : call mpi_bcast(f12vmr, 1, mpi_real8, mstrid, mpicom, ierr)
139 1536 : if (ierr /= 0) call endrun(sub//" mpi_bcast: f12vmr")
140 1536 : call mpi_bcast(co2vmr_rad, 1, mpi_real8, mstrid, mpicom, ierr)
141 1536 : if (ierr /= 0) call endrun(sub//" mpi_bcast: co2vmr_rad")
142 1536 : call mpi_bcast(scenario_ghg, len(scenario_ghg), mpi_character, mstrid, mpicom, ierr)
143 1536 : if (ierr /= 0) call endrun(sub//" mpi_bcast: scenario_ghg")
144 1536 : call mpi_bcast(rampyear_ghg, 1, mpi_integer, mstrid, mpicom, ierr)
145 1536 : if (ierr /= 0) call endrun(sub//" mpi_bcast: rampyear_ghg")
146 1536 : call mpi_bcast(bndtvghg, len(bndtvghg), mpi_character, mstrid, mpicom, ierr)
147 1536 : if (ierr /= 0) call endrun(sub//" mpi_bcast: bndtvghg")
148 1536 : call mpi_bcast(ramp_co2_start_ymd, 1, mpi_integer, mstrid, mpicom, ierr)
149 1536 : if (ierr /= 0) call endrun(sub//" mpi_bcast: ramp_co2_start_ymd")
150 1536 : call mpi_bcast(ramp_co2_annual_rate, 1, mpi_real8, mstrid, mpicom, ierr)
151 1536 : if (ierr /= 0) call endrun(sub//" mpi_bcast: ramp_co2_annual_rate")
152 1536 : call mpi_bcast(ramp_co2_cap, 1, mpi_real8, mstrid, mpicom, ierr)
153 1536 : if (ierr /= 0) call endrun(sub//" mpi_bcast: ramp_co2_cap")
154 1536 : call mpi_bcast(ghg_yearstart_model, 1, mpi_integer, mstrid, mpicom, ierr)
155 1536 : if (ierr /= 0) call endrun(sub//" mpi_bcast: ghg_yearstart_model")
156 1536 : call mpi_bcast(ghg_yearstart_data, 1, mpi_integer, mstrid, mpicom, ierr)
157 1536 : if (ierr /= 0) call endrun(sub//" mpi_bcast: ghg_yearstart_data")
158 1536 : call mpi_bcast(flbc_type, len(flbc_type), mpi_character, mstrid, mpicom, ierr)
159 1536 : if (ierr /= 0) call endrun(sub//" mpi_bcast: flbc_type")
160 1536 : call mpi_bcast(flbc_cycle_yr, 1, mpi_integer, mstrid, mpicom, ierr)
161 1536 : if (ierr /= 0) call endrun(sub//" mpi_bcast: flbc_cycle_yr")
162 1536 : call mpi_bcast(flbc_fixed_ymd, 1, mpi_integer, mstrid, mpicom, ierr)
163 1536 : if (ierr /= 0) call endrun(sub//" mpi_bcast: flbc_fixed_ymd")
164 1536 : call mpi_bcast(flbc_fixed_tod, 1, mpi_integer, mstrid, mpicom, ierr)
165 1536 : if (ierr /= 0) call endrun(sub//" mpi_bcast: flbc_fixed_tod")
166 1536 : call mpi_bcast(flbc_list, len(flbc_list(1))*pcnst, mpi_character, mstrid, mpicom, ierr)
167 1536 : if (ierr /= 0) call endrun(sub//" mpi_bcast: flbc_list")
168 1536 : call mpi_bcast(flbc_file, len(flbc_file), mpi_character, mstrid, mpicom, ierr)
169 1536 : if (ierr /= 0) call endrun(sub//" mpi_bcast: flbc_file")
170 :
171 1536 : flbc_timing%type = flbc_type
172 1536 : flbc_timing%cycle_yr = flbc_cycle_yr
173 1536 : flbc_timing%fixed_ymd = flbc_fixed_ymd
174 1536 : flbc_timing%fixed_tod = flbc_fixed_tod
175 :
176 1536 : if ( (bndtvghg.ne.'NONE') .and. (flbc_file.ne.'NONE') ) then
177 0 : call endrun(sub//': Cannot specify both bndtvghg and flbc_file ')
178 : endif
179 :
180 1536 : if (masterproc) then
181 2 : write(iulog,*) ' '
182 2 : write(iulog,*) sub//': Settings for control of GHG surface values '
183 2 : write(iulog,*) ' scenario_ghg = '//trim(scenario_ghg)
184 :
185 2 : if (scenario_ghg == 'FIXED' .or. scenario_ghg == 'RAMP_CO2_ONLY') then
186 :
187 0 : if (scenario_ghg == 'RAMP_CO2_ONLY') then
188 0 : write(iulog,*) ' CO2 will be ramped as follows:'
189 0 : write(iulog,*) ' Initial co2vmr = ', co2vmr
190 0 : write(iulog,*) ' ramp_co2_annual_rate = ', ramp_co2_annual_rate
191 0 : write(iulog,*) ' ramp_co2_cap = ', ramp_co2_cap
192 0 : if (ramp_co2_start_ymd == 0) then
193 0 : write(iulog,*) ' ramp starts at initial run time '
194 : else
195 0 : write(iulog,*) ' ramp_co2_start_ymd = ', ramp_co2_start_ymd
196 : end if
197 :
198 : else
199 0 : write(iulog,*) ' CO2 will be fixed:'
200 0 : write(iulog,*) ' co2vmr = ', co2vmr
201 : end if
202 :
203 0 : write(iulog,*) ' Other GHG values will be fixed as follows:'
204 0 : write(iulog,*) ' n2ovmr = ', n2ovmr
205 0 : write(iulog,*) ' ch4vmr = ', ch4vmr
206 0 : write(iulog,*) ' f11vmr = ', f11vmr
207 0 : write(iulog,*) ' f12vmr = ', f12vmr
208 :
209 2 : else if (scenario_ghg == 'RAMPED') then
210 0 : write(iulog,*) ' GHG values time interpolated from global annual averages:'
211 0 : write(iulog,*) ' bndtvghg = ', trim(bndtvghg)
212 0 : if (rampYear_ghg > 0) then
213 0 : write(iulog,*) ' Data from bndtvghg FIXED at year ', rampYear_ghg
214 : end if
215 :
216 2 : else if (scenario_ghg == 'CHEM_LBC_FILE') then
217 2 : write(iulog,*) ' GHG values time interpolated from LBC file:'
218 2 : write(iulog,*) ' flbc_file = ', trim(flbc_file)
219 2 : write(iulog,*) ' flbc_type = ', trim(flbc_type)
220 2 : if (flbc_type == 'CYCLICAL') then
221 0 : write(iulog,*) ' flbc_cycle_yr = ', flbc_cycle_yr
222 2 : else if (flbc_type == 'FIXED') then
223 0 : write(iulog,*) ' flbc_fixed_ymd = ', flbc_fixed_ymd
224 0 : write(iulog,*) ' flbc_fixed_tod = ', flbc_fixed_tod
225 : end if
226 2 : write(iulog,*) ' Species from LBC file:'
227 14 : do i = 1, pcnst
228 14 : if (flbc_list(i) == ' ') exit
229 14 : write(iulog,*) ' '//trim(flbc_list(i))
230 : end do
231 :
232 : else
233 : call endrun (sub//': scenario_ghg must be set to either FIXED, RAMPED, RAMP_CO2_ONLY, &
234 0 : & or CHEM_LBC_FILE')
235 :
236 : end if
237 :
238 2 : if (co2vmr_rad > 0._r8) then
239 0 : write(iulog,*) ' *** The CO2 prescribed by scenario_ghg has been OVERRIDDEN by ***'
240 0 : write(iulog,*) ' co2vmr_rad = ', co2vmr_rad
241 : end if
242 :
243 2 : write(iulog,*) ' '
244 : end if
245 :
246 1536 : end subroutine chem_surfvals_readnl
247 :
248 : !================================================================================================
249 :
250 1536 : subroutine chem_surfvals_init()
251 :
252 : !-----------------------------------------------------------------------
253 : !
254 : ! Purpose:
255 : ! Initialize the ramp options that are controlled by namelist input.
256 : ! Set surface values at initial time.
257 : ! N.B. This routine must be called after the time manager has been initialized
258 : ! since chem_surfvals_set calls time manager methods.
259 : !
260 : ! Author: B. Eaton - merged code from parse_namelist and rampnl_ghg.
261 : !
262 : !-----------------------------------------------------------------------
263 :
264 : use infnan, only: posinf, assignment(=)
265 : use mo_flbc, only: flbc_inti
266 : use phys_control, only: use_simple_phys
267 :
268 : !---------------------------Local variables-----------------------------
269 : integer :: yr, mon, day, ncsec
270 : character(len=*), parameter :: sub = 'chem_surfvals_init'
271 : !-----------------------------------------------------------------------
272 :
273 1536 : if (use_simple_phys) return
274 :
275 1536 : if (scenario_ghg == 'FIXED') then
276 0 : doRamp_ghg = .false.
277 0 : ramp_just_co2 = .false.
278 :
279 1536 : else if (scenario_ghg == 'RAMPED') then
280 0 : doRamp_ghg = .true.
281 0 : ramp_just_co2 = .false.
282 0 : call ghg_ramp_read
283 :
284 0 : fixYear_ghg = rampYear_ghg
285 :
286 0 : call chem_surfvals_set()
287 :
288 1536 : else if (scenario_ghg == 'RAMP_CO2_ONLY') then
289 :
290 0 : if(ramp_co2_start_ymd == 0) then
291 : ! by default start the ramp at the initial run time
292 0 : call get_start_date(yr, mon, day, ncsec)
293 0 : ramp_co2_start_ymd = yr*10000 + mon*100 + day
294 : end if
295 0 : co2_start = ramp_co2_start_ymd
296 :
297 0 : if(ramp_co2_annual_rate <= -100.0_r8) then
298 0 : write(iulog,*) 'RAMP_CO2: invalid ramp_co2_annual_rate= ',ramp_co2_annual_rate
299 0 : call endrun (sub//': RAMP_CO2_ANNUAL_RATE must be greater than -100.0')
300 : end if
301 :
302 0 : doRamp_ghg = .true.
303 0 : ramp_just_co2 = .true.
304 0 : co2_base = co2vmr ! save initial setting
305 :
306 0 : co2_daily_factor = (ramp_co2_annual_rate*0.01_r8+1.0_r8)**(1.0_r8/365.0_r8)
307 :
308 0 : if (ramp_co2_cap > 0.0_r8) then
309 0 : co2_limit = ramp_co2_cap * co2_base
310 : else ! if no cap/floor specified, provide default
311 0 : if (ramp_co2_annual_rate < 0.0_r8) then
312 0 : co2_limit = 0.0_r8
313 : else
314 0 : co2_limit = posinf
315 : end if
316 : end if
317 :
318 0 : if ((ramp_co2_annual_rate<0.0_r8 .and. co2_limit>co2_base) .or. &
319 : (ramp_co2_annual_rate>0.0_r8 .and. co2_limit<co2_base)) then
320 0 : write(iulog,*) sub//': ramp_co2_cap is unreachable'
321 0 : write(iulog,*) sub//': ramp_co2_annual_rate= ',ramp_co2_annual_rate,' ramp_co2_cap= ',ramp_co2_cap
322 0 : call endrun(sub//': ramp_co2_annual_rate and ramp_co2_cap incompatible')
323 : end if
324 :
325 0 : call chem_surfvals_set()
326 :
327 1536 : else if (scenario_ghg == 'CHEM_LBC_FILE') then
328 : ! set by lower boundary conditions file
329 1536 : call flbc_inti( flbc_file, flbc_list, flbc_timing, co2vmr, ch4vmr, n2ovmr, f11vmr, f12vmr )
330 1536 : call chem_surfvals_set()
331 :
332 : endif
333 :
334 1536 : if (masterproc) then
335 2 : write(iulog,*) ' '
336 2 : write(iulog,*) 'chem_surfvals_init: Initial ghg surface values:'
337 2 : write(iulog,*) ' co2 volume mixing ratio = ', chem_surfvals_co2_rad(vmr_in=.true.)
338 2 : write(iulog,*) ' ch4 volume mixing ratio = ', ch4vmr
339 2 : write(iulog,*) ' n2o volume mixing ratio = ', n2ovmr
340 2 : write(iulog,*) ' f11 volume mixing ratio = ', f11vmr
341 2 : write(iulog,*) ' f12 volume mixing ratio = ', f12vmr
342 2 : write(iulog,*) ' '
343 : end if
344 :
345 1536 : end subroutine chem_surfvals_init
346 :
347 : !=========================================================================================
348 :
349 0 : subroutine ghg_ramp_read()
350 :
351 : !-----------------------------------------------------------------------
352 : !
353 : ! Purpose:
354 : ! Read ramped greenhouse gas surface data.
355 : !
356 : ! Author: T. Henderson
357 : !
358 : !-----------------------------------------------------------------------
359 :
360 1536 : use ioFileMod, only: getfil
361 : #if ( defined SPMD )
362 : use mpishorthand, only: mpicom, mpiint, mpir8
363 : #endif
364 : character(len=*), parameter :: subname = 'ghg_ramp_read'
365 :
366 : !---------------------------Local variables-----------------------------
367 : integer :: ncid
368 : integer :: co2_id
369 : integer :: ch4_id
370 : integer :: n2o_id
371 : integer :: f11_id
372 : integer :: f12_id
373 : integer :: adj_id
374 : integer :: date_id
375 : integer :: time_id
376 : integer :: ierror
377 : character(len=256) :: locfn ! netcdf local filename to open
378 :
379 0 : if (masterproc) then
380 0 : call getfil (bndtvghg, locfn, 0)
381 0 : call handle_ncerr( nf90_open (trim(locfn), NF90_NOWRITE, ncid),subname,__LINE__)
382 :
383 0 : write(iulog,*)'GHG_RAMP_READ: reading ramped greenhouse gas surface data from file ',trim(locfn)
384 :
385 0 : call handle_ncerr( nf90_inq_varid( ncid, 'date', date_id ),subname,__LINE__)
386 0 : call handle_ncerr( nf90_inq_varid( ncid, 'CO2', co2_id ),subname,__LINE__)
387 0 : call handle_ncerr( nf90_inq_varid( ncid, 'CH4', ch4_id ),subname,__LINE__)
388 0 : call handle_ncerr( nf90_inq_varid( ncid, 'N2O', n2o_id ),subname,__LINE__)
389 0 : call handle_ncerr( nf90_inq_varid( ncid, 'f11', f11_id ),subname,__LINE__)
390 0 : call handle_ncerr( nf90_inq_varid( ncid, 'f12', f12_id ),subname,__LINE__)
391 0 : call handle_ncerr( nf90_inq_varid( ncid, 'adj', adj_id ),subname,__LINE__)
392 0 : call handle_ncerr( nf90_inq_dimid( ncid, 'time', time_id ),subname,__LINE__)
393 0 : call handle_ncerr( nf90_inquire_dimension( ncid, time_id, len=ntim ),subname,__LINE__)
394 :
395 : endif
396 : #if (defined SPMD )
397 0 : call mpibcast (ntim, 1, mpiint, 0, mpicom)
398 : #endif
399 : ! these arrays are never deallocated
400 : allocate ( yrdata(ntim), co2(ntim), ch4(ntim), n2o(ntim), &
401 0 : f11(ntim), f12(ntim), adj(ntim), stat=ierror )
402 0 : if (ierror /= 0) then
403 0 : write(iulog,*)'GHG_RAMP_READ: ERROR, allocate() failed!'
404 0 : call endrun
405 : endif
406 0 : if (masterproc) then
407 0 : call handle_ncerr( nf90_get_var (ncid, date_id, yrdata ),subname,__LINE__)
408 0 : yrdata = yrdata / 10000
409 0 : call handle_ncerr( nf90_get_var (ncid, co2_id, co2 ),subname,__LINE__)
410 0 : call handle_ncerr( nf90_get_var (ncid, ch4_id, ch4 ),subname,__LINE__)
411 0 : call handle_ncerr( nf90_get_var (ncid, n2o_id, n2o ),subname,__LINE__)
412 0 : call handle_ncerr( nf90_get_var (ncid, f11_id, f11 ),subname,__LINE__)
413 0 : call handle_ncerr( nf90_get_var (ncid, f12_id, f12 ),subname,__LINE__)
414 0 : call handle_ncerr( nf90_get_var (ncid, adj_id, adj ),subname,__LINE__)
415 0 : call handle_ncerr( nf90_close (ncid),subname,__LINE__)
416 0 : write(iulog,*)'GHG_RAMP_READ: successfully read ramped greenhouse gas surface data from years ',&
417 0 : yrdata(1),' through ',yrdata(ntim)
418 : endif
419 : #if (defined SPMD )
420 0 : call mpibcast (co2, ntim, mpir8, 0, mpicom)
421 0 : call mpibcast (ch4, ntim, mpir8, 0, mpicom)
422 0 : call mpibcast (n2o, ntim, mpir8, 0, mpicom)
423 0 : call mpibcast (f11, ntim, mpir8, 0, mpicom)
424 0 : call mpibcast (f12, ntim, mpir8, 0, mpicom)
425 0 : call mpibcast (adj, ntim, mpir8, 0, mpicom)
426 0 : call mpibcast (yrdata, ntim, mpiint, 0, mpicom)
427 : #endif
428 :
429 0 : return
430 :
431 : end subroutine ghg_ramp_read
432 :
433 : !=========================================================================================
434 :
435 15420432 : function chem_surfvals_get(name)
436 : use physconst, only: mwdry, mwco2
437 :
438 : character(len=*), intent(in) :: name
439 :
440 : real(r8) :: rmwco2
441 : real(r8) :: chem_surfvals_get
442 :
443 15420432 : rmwco2 = mwco2/mwdry ! ratio of molecular weights of co2 to dry air
444 1495368 : select case (name)
445 : case ('CO2VMR')
446 1495368 : chem_surfvals_get = co2vmr
447 : case ('CO2MMR')
448 0 : chem_surfvals_get = rmwco2 * co2vmr
449 : case ('N2OVMR')
450 3107424 : chem_surfvals_get = n2ovmr
451 : case ('CH4VMR')
452 3107424 : chem_surfvals_get = ch4vmr
453 : case ('F11VMR')
454 3107424 : chem_surfvals_get = f11vmr
455 : case ('F12VMR')
456 3107424 : chem_surfvals_get = f12vmr
457 : case ('O2MMR')
458 1495368 : chem_surfvals_get = o2mmr
459 : case default
460 15420432 : call endrun('chem_surfvals_get does not know name')
461 : end select
462 :
463 15420432 : end function chem_surfvals_get
464 :
465 :
466 : !=========================================================================================
467 :
468 1618250 : function chem_surfvals_co2_rad(vmr_in)
469 :
470 : ! Return the value of CO2 (as mmr) that is radiatively active.
471 :
472 : ! This method is used by ghg_data to set the prescribed value of CO2 in
473 : ! the physics buffer. If the user has set the co2vmr_rad namelist
474 : ! variable then that value will override either the value set by the
475 : ! co2vmr namelist variable, or the values time interpolated from a
476 : ! dataset.
477 :
478 : ! This method is also used by cam_history to write the radiatively active
479 : ! CO2 to the history file. The optional argument allows returning the
480 : ! value as vmr.
481 :
482 : use physconst, only: mwdry, mwco2
483 :
484 : ! Arguments
485 : logical, intent(in), optional :: vmr_in ! return CO2 as vmr
486 :
487 : ! Return value
488 : real(r8) :: chem_surfvals_co2_rad
489 :
490 : ! Local variables
491 : real(r8) :: convert_vmr ! convert vmr to desired output
492 : !-----------------------------------------------------------------------
493 :
494 : ! by default convert vmr to mmr
495 1618250 : convert_vmr = mwco2/mwdry ! ratio of molecular weights of co2 to dry air
496 1618250 : if (present(vmr_in)) then
497 : ! if request return vmr
498 122882 : if (vmr_in) convert_vmr = 1.0_r8
499 : end if
500 :
501 1618250 : if (co2vmr_rad > 0._r8) then
502 0 : chem_surfvals_co2_rad = convert_vmr * co2vmr_rad
503 : else
504 1618250 : chem_surfvals_co2_rad = convert_vmr * co2vmr
505 : end if
506 :
507 1618250 : end function chem_surfvals_co2_rad
508 :
509 : !=========================================================================================
510 :
511 372480 : subroutine chem_surfvals_set()
512 :
513 : use ppgrid, only: begchunk, endchunk
514 : use mo_flbc, only: flbc_gmean_vmr, flbc_chk
515 : use scamMod, only: single_column, scmiop_flbc_inti, use_camiop
516 :
517 : !---------------------------Local variables-----------------------------
518 :
519 : integer :: yr, mon, day, ncsec ! components of a date
520 : integer :: ncdate ! current date in integer format [yyyymmdd]
521 :
522 372480 : if ( doRamp_ghg ) then
523 0 : if(ramp_just_co2) then
524 0 : call chem_surfvals_set_co2()
525 : else
526 0 : call chem_surfvals_set_all()
527 : end if
528 372480 : elseif (scenario_ghg == 'CHEM_LBC_FILE') then
529 : ! set mixing ratios from cam-chem/waccm lbc file
530 372480 : call flbc_chk()
531 372480 : if (single_column .and. use_camiop) then
532 0 : call scmiop_flbc_inti( co2vmr, ch4vmr, n2ovmr, f11vmr, f12vmr )
533 : else
534 : ! set by lower boundary conditions file
535 372480 : call flbc_gmean_vmr(co2vmr,ch4vmr,n2ovmr,f11vmr,f12vmr)
536 : endif
537 : endif
538 :
539 372480 : if (masterproc .and. is_end_curr_day()) then
540 12 : call get_curr_date(yr, mon, day, ncsec)
541 12 : ncdate = yr*10000 + mon*100 + day
542 12 : write(iulog,*) 'chem_surfvals_set: ncdate= ',ncdate,' co2vmr=',co2vmr
543 :
544 12 : if (.not. ramp_just_co2 .and. mon==1 .and. day==1) then
545 2 : write(iulog,*) 'chem_surfvals_set: ch4vmr=', ch4vmr, ' n2ovmr=', n2ovmr, &
546 4 : ' f11vmr=', f11vmr, ' f12vmr=', f12vmr
547 : end if
548 :
549 : end if
550 :
551 372480 : return
552 372480 : end subroutine chem_surfvals_set
553 :
554 : !=========================================================================================
555 :
556 0 : subroutine chem_surfvals_set_all()
557 : !-----------------------------------------------------------------------
558 : !
559 : ! Purpose:
560 : ! Computes greenhouse gas volume mixing ratios via interpolation of
561 : ! yearly input data.
562 : !
563 : ! Author: B. Eaton - updated ramp_ghg for use in chem_surfvals module
564 : !
565 : !-----------------------------------------------------------------------
566 372480 : use interpolate_data, only: get_timeinterp_factors
567 :
568 : !---------------------------Local variables-----------------------------
569 :
570 : integer yrmodel ! model year
571 : integer nyrm ! year index
572 : integer nyrp ! year index
573 : integer :: yr, mon, day ! components of a date
574 : integer :: ncdate ! current date in integer format [yyyymmdd]
575 : integer :: ncsec ! current time of day [seconds]
576 :
577 : real(r8) :: calday ! current calendar day
578 : real(r8) doymodel ! model day of year
579 : real(r8) doydatam ! day of year for input data yrdata(nyrm)
580 : real(r8) doydatap ! day or year for input data yrdata(nyrp)
581 : real(r8) deltat ! delta time
582 : real(r8) fact1, fact2 ! time interpolation factors
583 : real(r8) cfcscl ! cfc scale factor for f11
584 :
585 : integer yearRan_model ! model ran year
586 : !
587 : ! ---------------------------------------------------------------------
588 : !
589 0 : calday = get_curr_calday()
590 0 : call get_curr_date(yr, mon, day, ncsec)
591 0 : ncdate = yr*10000 + mon*100 + day
592 : !
593 : ! determine ghg_use_calendar
594 : !
595 0 : if ( ghg_yearStart_model > 0 .and. ghg_yearStart_data > 0 ) then
596 0 : ghg_use_calendar = .false.
597 : else
598 0 : ghg_use_calendar = .true.
599 : end if
600 : !
601 : ! determine index into input data
602 : !
603 0 : if ( fixYear_ghg > 0) then
604 0 : yrmodel = fixYear_ghg
605 0 : nyrm = fixYear_ghg - yrdata(1) + 1
606 : else
607 0 : if ( ghg_use_calendar) then
608 0 : yrmodel = yr
609 0 : nyrm = yr - yrdata(1) + 1
610 : else
611 0 : yearRan_model = yr - ghg_yearStart_model
612 0 : if ( yearRan_model < 0 ) then
613 0 : call endrun('chem_surfvals_set_all: incorrect ghg_yearStart_model')
614 : endif
615 0 : yrmodel = yearRan_model + ghg_yearStart_data
616 :
617 0 : nyrm = ghg_yearStart_data + yearRan_model - yrdata(1) + 1
618 : end if
619 : end if
620 :
621 0 : nyrp = nyrm + 1
622 : !
623 : ! if current date is before yrdata(1), quit
624 : !
625 0 : if (nyrm < 1) then
626 0 : write(iulog,*)'chem_surfvals_set_all: data time index is out of bounds'
627 0 : write(iulog,*)'nyrm = ',nyrm,' nyrp= ',nyrp, ' ncdate= ', ncdate
628 0 : call endrun
629 : endif
630 : !
631 : ! if current date later than yrdata(ntim), call endrun.
632 : ! if want to use ntim values - uncomment the following lines
633 : ! below and comment the call to endrun and previous write
634 : !
635 0 : if (nyrp > ntim) then
636 0 : call endrun ('chem_surfvals_set_all: error - current date is past the end of valid data')
637 : ! write(iulog,*)'chem_surfvals_set_all: using ghg data for ',yrdata(ntim)
638 : ! co2vmr = co2(ntim)*1.e-06
639 : ! ch4vmr = ch4(ntim)*1.e-09
640 : ! n2ovmr = n2o(ntim)*1.e-09
641 : ! f11vmr = f11(ntim)*1.e-12*(1.+cfcscl)
642 : ! f12vmr = f12(ntim)*1.e-12
643 : ! co2mmr = rmwco2 * co2vmr
644 : ! return
645 : endif
646 : !
647 : ! determine time interpolation factors, check sanity
648 : ! of interpolation factors to within 32-bit roundoff
649 : ! assume that day of year is 1 for all input data
650 : !
651 0 : doymodel = yrmodel*365._r8 + calday
652 0 : doydatam = yrdata(nyrm)*365._r8 + 1._r8
653 0 : doydatap = yrdata(nyrp)*365._r8 + 1._r8
654 :
655 : call get_timeinterp_factors(.false.,2,doydatam,doydatap, doymodel, &
656 0 : fact1, fact2,'chem_surfvals')
657 :
658 : !
659 : ! do time interpolation:
660 : ! co2 in ppmv
661 : ! n2o,ch4 in ppbv
662 : ! f11,f12 in pptv
663 : !
664 0 : co2vmr = (co2(nyrm)*fact1 + co2(nyrp)*fact2)*1.e-06_r8
665 0 : ch4vmr = (ch4(nyrm)*fact1 + ch4(nyrp)*fact2)*1.e-09_r8
666 0 : n2ovmr = (n2o(nyrm)*fact1 + n2o(nyrp)*fact2)*1.e-09_r8
667 :
668 0 : cfcscl = (adj(nyrm)*fact1 + adj(nyrp)*fact2)
669 0 : f11vmr = (f11(nyrm)*fact1 + f11(nyrp)*fact2)*1.e-12_r8*(1._r8+cfcscl)
670 0 : f12vmr = (f12(nyrm)*fact1 + f12(nyrp)*fact2)*1.e-12_r8
671 :
672 0 : return
673 : end subroutine chem_surfvals_set_all
674 :
675 : !=========================================================================================
676 :
677 0 : subroutine chem_surfvals_set_co2()
678 : !-----------------------------------------------------------------------
679 : !
680 : ! Purpose:
681 : ! Computes co2 greenhouse gas volume mixing ratio via ramping info
682 : ! provided in namelist var's
683 : !
684 : ! Author: B. Eaton - updated ramp_ghg for use in chem_surfvals module
685 : !
686 : !-----------------------------------------------------------------------
687 : use shr_kind_mod, only: r8 => shr_kind_r8
688 :
689 : !---------------------------Local variables-----------------------------
690 :
691 : real(r8) :: daydiff ! number of days of co2 ramping
692 : integer :: yr, mon, day, ncsec ! components of a date
693 : integer :: ncdate ! current date in integer format [yyyymmdd]
694 : !-----------------------------------------------------------------------
695 :
696 0 : call get_curr_date(yr, mon, day, ncsec)
697 0 : ncdate = yr*10000 + mon*100 + day
698 :
699 0 : call timemgr_datediff(co2_start, 0, ncdate, ncsec, daydiff)
700 :
701 0 : if (daydiff > 0.0_r8) then
702 :
703 0 : co2vmr = co2_base*(co2_daily_factor)**daydiff
704 :
705 0 : if(co2_daily_factor < 1.0_r8) then
706 0 : co2vmr = max(co2vmr,co2_limit)
707 : else
708 0 : co2vmr = min(co2vmr,co2_limit)
709 : end if
710 : end if
711 :
712 0 : return
713 : end subroutine chem_surfvals_set_co2
714 :
715 :
716 : !=========================================================================================
717 :
718 : end module chem_surfvals
|
